Tube Removal Tools

Features:

• This “One Revolution” Internal Tube Cutter is designed for hand operation using a ratchet handle.
• The Cutter Tool Bit operates on an eccentric principle. The Tube Cutter is entered in the tube with the Tool Bit in closed position , ratchet is applied and turned in clockwise direction. The Tool Bit contacts the tube during the One Revolution and pierces the tube wall and as turning is continued the Tool Bit shears through the tube along its circumference. This Cutter is fitted with an adjustable collar enabling it to reach into tubes at various distances and they are available in optional increments of 2”(50.8mm). Standard adjustable reach is 6”(152.4mm).
• ”A” reach = 8”(203.2). “B” reach = 10”(254.0mm). “C” reach = 12”(304.8mm) etc.
• All Cutters are available for MM tube sizes also

Manual Tube Puller,These are hand operated equipment, which are instrumental in removing minute quantities of tubes. Our clients can avail from us standard range of manual tube puller from 3/8" to 1.1/2". Customization can be done as per our client specific demand.

Features:

• No Power Required :- Manual Insertion of tool & easy removal of tube with hand wrench.
• Easy to Use :- Hex at the end of the Spear allows tightening without disassembly of tool.

Collapsing Tools which is highly advisable to use these for 16 G and thinner tubes. These are used in collapsing tubes and driving out the collapsed tube from a tube sheet by employing a chipping hammer. Customization can be done in order to satisfy to various requirements of our esteemed clients.

Features:

• This tool is used with chipping hammer to knockout the tube stubs / & tubes from the tube sheet.
• Available in 01,06 & 15 Shank.
• While Ordering specify the gauge with O.D. of tube & Shank required.
• Standard Reach is 6" Long reach also available on request.

PR-68 Series Internal Tube Cutter, The raw material used is stringently checked by our quality experts before being put to use. These are chiefly used in cutting thick walled boiler tubes, with great precision. Three modes can be used for proper operations, namely electric, pneumatic or hydraulic drive.

UATP Series Internal Tube Cutter , which is fabricated using latest techniques available in market. These are instrumental in cutting both ferrous and non ferrous tubes for condensers and Heat Exchangers. Tubes of different thicknesses can be cut, using one internal tube cutter by altering the pilot. These are available in a standard reach up to 4". Optional reach of 6", 8", 10" and 12" can also be availed by the clients. These can be used either with electric or pneumatic drill machine.

We are one of the most proficient manufacturers and suppliers of high-end Wall Reducer. These are instrumental in thinning out the walls of heavy gauge tubes as a step in their removal from tube sheet. Our wall reducers works best for tube sheets of thickness upto 5". These equipment are manufactured in accordance with the set norms of the industry.

Features:

• This tool is used to reduce the wall thickness of heavy gauge tube.
• While Ordering specify the gauge with O.D. of tube.
• This tool is suited for 5" tube sheet.
• Long reach also available as per the requirement.

We are engaged in offering the finest quality Hydraulic Pulling Gun.

Other Details:

• High pressure pump for pulling toughest jobs
• Removes tube without damage
• Low set up time / ease of operation
• Available with choice of electric / pneumatic operation
• Automatic switchover from low pressure to high pressure
• Interchangeable pulling gun accessories compatible with existing systems on the market
• Single man operation

We “Unnati Tube Tools” are a Sole Proprietorship based firm, engaged as the foremost Manufacturer of Boiler Tube Expander, Chiller Tube Cleaning Machine and Many More.

Tube Drift Knock-Out Tools, which is manufactured using high grade raw material. These tools can be used with cordless drill in order to pull out punch dies with high accuracy. We ensure that these tools are in compliance with the set standards of the industry and applicable for various industries. Timely delivery is ensured by our efficient logistic experts in order to garner our clients' satisfaction.

Features:

• This tool is used with chipping hammer to knockout the tube stubs / & tubes from the tube sheet.
• Available in 01,06 & 15 Shank.
• While Ordering specify the gauge with O.D. of tube & Shank required.
• Standard Reach is 6" Long reach also available on request.